SYNOPSYS光学设计软件|ASAP光学设计软件|SOLIDWORKS 三维建模设计软件|RP Fiber Power仿真设计软件|武汉墨光科技有限公司

解决方案

SYNOPSYS™15.66 版本发布

The update to version 15.66 incorporates the following changes:

Features:

1.The new version of object OBD has been revised.The pupil from a real stop is rotated with skew field,and the new OBD will now follow that same rule, to make things simpler to understand.

2.ACON PICKUPS ... now transfers all ZFILE object data if you specify 1 POB 1. Before,it only transferred data from zoom 1 .

3.SYNOPSYS can now run on a remote desktop. The dongle must be plugged in to that PC for it to work.

Bugs Fixed:

1.AED worked on all lenses, including aspherics.But that makes no sense,since the target to make the paraxial power go to zero ignored the higher orders. Now,AED ignores aspheric elements and the problem goes away..

2.ZDWG did not properly draw rays if the lens used the new OBD object.

3.Multicore optimization with the new switch 99 did not work properly if the optimization failed on the first pass.

4.Hyperhemispheric surfaces were not drawn correctly by CDWG.

5.If you gave a FIXed tolerance to an RFR in BTOL, the summary at the end did not repeat the same value if the element had EFILE data where point "A" was not at the CAO of the lens.